Advanced Design, Uncompromised Purity
|
Series E was designed for applications where feed water has a very low pressure or where the source water contains higher than normal amounts of dissolved solids. Our advanced design allows the source water to pass through a sediment filter before the booster pump. This process avoids pump valve clogging caused by sediment particles. Also the pump is mounted behind the membrane housing for space saving.
| |
|
|
TGI - 625UP
|
6 stage RO+UV System
|
Our advanced features include:
|
- Five micron Sediment filter
- Granular Activated Carbon (GAC) filter
- Extruded Carbon (CTO) filter
- Thin Film Composite (TFE) membrane
- GAG Post carbon filter
- Advanced Booster Pump
- Tank Shut Off (TSO) Valve
- Automatic Shut Off Valve
|
System shown with optional faucet monitor that continuously checks membrane effectiveness.
| | |
|
TGI-325E
|
3 stage RO with Permeate Pump requires no electricity and works effectively for inlet water pressure as low as 30 psi. The Permeate Pump is powered by energy from brine normally lost down the drain. The results are:
- Saves 400% of waste water vs.conventional
- Fills product tank up to 5 times faster under normal use
- Increases membrane life
| |
| |
|
TGI-525P
|
5stage RO with Pump 35 gpd
|
Our most popular models in Series E have 25 gallon per day capacity with a 4.4 gallon product water storage tank clear housing on the first stage is available.
| |
| |
