Home | Contact | Search

Series POU

POINT OFFICE USE RO COOLERS

The Series POU from TGI are much more convenient and economical than buying bottled water. No need to lift heavy bottled water or wait for bottled water deliveries. With this system, it not only converts tap water directly to safe drinking water within your own office, but also provides abundant supply of fresh water.

POU-475H

Tri-Temp 4 stage RO Cooler

Limited 5-year Warranty(Continental) limits of the United States and Canada.) Five years on the sealed refrigeration system and most components parts. Filters and membrane are consumable items, not applicable to warrant.

Larger Capacity Water Reservoir:
Stores 3 times the chilled water of standard bottled water cooler.
Dual Mechanical Float:
Has a lock-off secondary float with reset button and a built-in 0.5 GPM restrictor and strainer.
New Hot Tank:
Automatic reset and adjustable temperature is also easy to clean with replaceable element.
Cold Water Thermostat:
Temperature is controlled by fixed setting thermostat.
Electrical:
115 volts, 60 Hz; Compressor hp: 1/20. Full load amps; POU-425, 1.1; POU-425H, 5.4; 3-wire service card and polarized plug furnished.
Drip Receptor:
Ruggedly molded, 2" deep. Drops into place, easy to clean.
1st stage filtration:
12" inline Sediment Filter (FI-SED012): Stop and dirt, rust and other solid particles down to 5 micron.
2nd Stage Filtration:
12" Inline Carbon Filter (FI-CBA012): Remove chlorine.
3rd Stage Filtration:
Thin Film Membrane 75 GPD (MM-TFF90/160): Removes virtually all organic contaminant as well as dissolved solid sand heavy metals, produce pure water up to 50 gallons per day.
4th Stage Filtration:
10" Inline Carbon Filter (FI-CBA010): This activated carbon will reduce most other contaminates that may past R.O. membrane and hence improve the taste of the water.
Dimensions:
13 1/2" wide x 16" deep x 43 1/2" height.
Polypropylene:
Eliminates scratched Floors, no more rust spots.
Capacity:
Provides 0.8 gallons of 50ºF water (when ambient temperature is 90ºF; water inlet temperature is 80ºF).
Capacity:
45 six-ounce cups of piping hot water per hour.
Integrated Built-in 4 Stage RO Systems:
POU-475H:
Tri-Temp 4 stage 75 Gallon Per Day RO Water Cooler.

All filters are NSF listed standard 42, membrane is NSF listed standard 58.

Model:	POU-475	POU-475H	POU-475H	POU-475HPY
Water Pressure	-	-	-	-
(Mini-Max psi)	60-120	60-120	10-80	10-80
Recovery Rate	20-25%	20-25%	25-30%	25-30%
Rejection Rate	96±2%	96±2%	97±2%	97±2%
Net Weight (lbs)	66	70	78	78
Cold & Cook	*	-	-	-
Cold,Cook & Hot	-	*	*	*

POU1RRHS

Hot'n Cold Cooler

POU1AQHK

One-piece below-molded polycarbonare cabinet.
Large lower front access to filter compartment.
Mechanical float assembly.
Probe and Sleeve cooling.
Filter compartment size 16.75 height x 5.75 depth x 10.25 width.
Snap on one-piece flat lid assembly.
4.3 gallon injection molded reservoir.
Polypropylene base.
Front access adjustable cold control.
Hot tank adjustment and on/off switch accessible from front filter compartment.
Faucets and cover remove with reservoir.
Reservoir can be removed with approximately 2 gallons of water inside.
Open top reservoir for easy sanitation.
.3 micron air filter.
Safer hot faucet.
Interchangeable parts with RR/SR cooler:
1. Faucets.
2. Faucet washers.
3. O- rings
4. Probe
5. Hot tank.
6. Hot tank components.
7. Cold control.